Epson SureColor SC-F6000 User Manual Download Page 51

Page: 51 / 81

Tear off the ink pack spout opening.

Fill the ink tank with the ink from the ink pack.

Insert the spout of the ink pack into the ink tank
ink inlet groove and slowly tilt to pour out the
ink.

Important:

Get all the ink out of the ink pack so that there
is none remaining.

Do not use the ink in an ink pack to refill
multiple different ink tanks.

This can cause messages from the remaining
ink warning system to not be displayed
properly.

Put the ink inlet cap back on the ink tank.

Close the slider ink inlet cover.

Replacing Maintenance Boxes

If the message

No Enough Space

is displayed, replace

the specified Maintenance Box.

Supported Maintenance Boxes

“Options and Consumable Products” on

page 64

SC-F6000 Series User’s Guide

Maintenance

Summary of Contents for SureColor SC-F6000


















































































Search results

Summary of Contents for SureColor SC-F6000

Reviews:

Related manuals for SureColor SC-F6000

Brands by name

Popular brands

Epson SureColor SC-F6000, User Manual

Search results

Summary of Contents for SureColor SC-F6000

Reviews:

Related manuals for SureColor SC-F6000

Brands by name

Popular brands