Epson SureColor F6370 User Manual Download Page 126

Page: 126 / 135

126

Ink Pack Specifications

Sublimation transfer ink color

High Density Black, Cyan, Magenta, Yellow

Ink life

Do not use if the date on the package has expired

Print quality guarantee

25 days (from the day the ink tank was refilled from the ink pack)

Temperature

In storage (opened): 41 to 95 °F (5 to 35 °C); 59 to 77 °F (15 to 25
°C) recommended for use

Capacity

1100 ml

Parent topic:

Technical Specifications

Related references

Consumables and Replacement Parts

Media Specifications

Note:

Since the quality of any particular brand or type of paper may be changed by the manufacturer at

any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing large jobs. Do not use paper that is
wrinkled, scratched, torn, or dirty.

Roll core size

2 or 3 inches

Roll outer diameter

Up to 5.9 inches (150 mm)

Media width

(with auto take-up reel installed)

10 to 44 inches (254 to 1118 mm)

17 to 44 inches (432 to 1118 mm)

Media thickness

Up to 0.04 inch (1 mm)

Parent topic:

Technical Specifications

Safety and Approvals Specifications

United States

Safety: UL60950-1

EMC: FCC Part15 Subpart B Class A

Summary of Contents for SureColor F6370








































































































































Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands

Epson SureColor F6370, User Manual

Search results

Summary of Contents for SureColor F6370

Reviews:

Related manuals for SureColor F6370

Brands by name

Popular brands