Follow these steps:
1.
2.
3.
4.
5.
6.
7.
Open the Hard Drive folder and double-click
Bi-D Calibration Utility.
You see a prompt asking you to choose the interface type.
Click
Serial
or
Network,
as appropriate.
You see the Bi-D Calibration Utility screen. First specify
whether you connected the printer to the modem or printer
port by clicking the appropriate icon.
Click the
Pattern 1
button to align the print heads using
the
first pattern page.
Wait for about two minutes while the printer prints a page
containing multiple patterns of vertical lines, each assigned
with an offset value. In most patterns,
the
vertical lines are
slightly misaligned. Look for the pattern that is most
closely aligned.
I
I
I
I
Aligned
Not aligned
Enter the offset value of
the
pattern that is most closely
aligned in
the
N
O
.
box and click
OK.
The printer prints a
confirmation
page.
Repeat steps 4 and 5, selecting the
Pattern 2
through
Pattern
5 buttons and entering the offset value of the
pattern that is most closely aligned on
each
pattern page.
When you finish, click
Quit.
If you
notice
later that the vertical alignment of your printed
pages is off, repeat the calibration procedure.
Using
the Printer Driver Utilities
3-3
