Using the Macintosh Printer Driver
The Macintosh printer driver contains settings that allow you
to control your print job. The printer comes with default values
for all the settings, as listed in the table on page 2-8. Change the
printer driver settings only if you want to use values different
from the default ones.
The driver includes an Automatic option (default) for the
Method
setting. This option lets the printer driver analyze
each page of the document you will print and then select the
appropriate halftoning settings automatically.
Accessing the Driver
You can access the printer driver settings from two dialog
boxes within your application: Print and Page Setup. Most
settings are available from the Print dialog box; however, to
change the paper size or orientation, use the Page Setup dialog
box as described on page 2-14.
The driver settings are saved when you save your image or
document. However, each time you close an application and
open a new one, the default settings are in effect.
To bring up the Print dialog box, choose
from the file
menu of your application program. You see a dialog box
similar to the one shown below. (The dialog box you see might
be different, depending on your software program.)
Installing and Using the Printer Driver
2-7
