❑
Return unused sheets to their original package as soon as
possible after you finish printing. Unfavorable storage
conditions—especially high temperature, humidity, and
direct sunlight—can damage the media.
❑
Remember to select the appropriate setting in the driver
software before you print. See your
Setup and Software Guide
for instructions.
❑
You can print on sheets of labels in your printer; just follow
the instructions for loading plain paper on page 1-4. Make
sure the sheets are not curled and that no labels are peeled
away from the backing when you load them. You may need
to adjust the paper thickness lever; see page 1-11.
❑
If the paper doesn’t feed properly or jams, see
“Troubleshooting” in Chapter 3.
Loading Special Papers and Transparencies
Follow these guidelines when printing on coated paper, glossy
paper, or transparencies:
❑
Use special coated paper for 360 or 720 dpi or
transparencies only under these normal operating
conditions:
Temperature:
59° to 77° F (15° to 25° C)
Humidity:
40% to 60% RH
❑
When printing on glossy paper, remove each sheet from
the output tray as soon as it is printed and do not stack
sheets until they are completely dry.
The paper tray can hold 70 sheets of coated paper, 30 sheets of
high-quality glossy paper, or 50 transparencies.
L
Verde+ Reference Guide
A5 size
Chapter 1
10-25-95
DR, pass 2-Rev1
1-8
Paper Handling
