Epson Stylus Pro 9700 Series User Manual Download Page 181

Page: 181 / 228

181

Solving Problems

181

PAPER SIZE ERROR

LOAD CORRECT PAPER SIZE

The loaded paper size does not
match the size of the image.

Make sure the paper size matches the size
of the image.

PAPER SKEW

LOAD PAPER PROPERLY

Paper is not loaded straight.

Press the

button and make sure the

paper is loaded straight.

PRINTER ERROR

RESTART THE PRINTER

You tried to print while an error
condition was present.

Press the

power button to turn off the

printer, then turn it back on.

REPLACE MAINTENANCE
TANK SOON

The maintenance tank is
nearing the end of its service
life.

Replace the maintenance tank with a new
one as soon as possible.

SOME NOZZLES ARE
CLOGGED

Head cleaning has been
performed but did not clear the
nozzles.

Print the nozzle check pattern and, if there
are missing dots, perform head cleaning.

WRONG MAIN. TANK RIGHT
SIDE MAINT. TANK WRONG
TYPE

INSERT CORRECT TANK

A non-genuine maintenance
tank is installed.

Replace the maintenance tank with a
genuine Epson maintenance tank.

WRONG MAIN. TANK LEFT
SIDE MAINT. TANK WRONG
TYPE

INSERT CORRECT TANK

A non-genuine maintenance
tank is installed.

Replace the maintenance tank with a
genuine Epson maintenance tank.

Message

Explanation

Response

Summary of Contents for Stylus Pro 9700 Series





































































































































































































































Search results

Summary of Contents for Stylus Pro 9700 Series

Reviews:

Brands by name

Popular brands

Epson Stylus Pro 9700 Series, User Manual

Search results

Summary of Contents for Stylus Pro 9700 Series

Reviews:

Brands by name

Popular brands