manualshive.com logo in svg

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst, User Manual

Share
Download
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst User Manual Download Page 239

Maintenance and Transportation

239

Replacing the Maintenance Tank

If 

MNT TNK FULL

 or 

MNT TK NEAR FULL

 appears on the LCD panel, 

replace the maintenance tank. 

To check the product code of the Maintenance Tank, see 
“Consumable Products” on page 328.

To replace the maintenance tank, follow the steps below.

1. For EPSON Stylus Pro 4880/4880C only:

If you are using 220 ml ink cartridges, remove the four ink 
cartridges from the right ink compartment. Make sure to close 
the ink compartment cover after you have removed the ink 
cartridges.

2. Open the package of a new maintenance tank.

3. Put your hand on the handle under the right ink 

compartment, then gently pull the maintenance tank 
outward.

4. Put the used maintenance tank in the plastic bag provided.

Note:

Do not tilt the used maintenance tank until after it is sealed in the 
plastic bag.

Summary of Contents for Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands