Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst User Manual Download Page 230

Page: 230 / 338

Maintenance and Transportation

230

7. Lower the ink lever to the secured position.

Note:

If you install an ink cartridge in the wrong slot,

NO INK CRTG

appears on the LCD panel. Make sure that the correct ink cartridge
is installed in the correct slot.

8. Close the ink compartment cover. The printer returns to the

previous status.

Note:

If you have installed 220 ml ink cartridge, do not close the ink
compartment cover.

Summary of Contents for Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst



















































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst

Reviews:

Brands by name

Popular brands

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst, User Manual

Search results

Summary of Contents for Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst

Reviews:

Brands by name

Popular brands