Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine, Reference Manual, Page: 66 / 312

-65
Status messages
The following messages show the printer status. For error
messages, see “Printer Stops Printing Unexpectedly”.
READY Ready to print data.
PRINTING The printer is printing a job.
POWER OFF The printer is being turned off.
WAIT The printer is warming up, charging ink or initializing.
INK CHARGING
nnn% The printer is charging the ink delivery system. This
message shows the progress of the ink charging
process.
INK DRY nn MIN Drying ink after printing. Wait for nn minutes.
PAUSE The printer is paused. To resume printing, press the
Pause button.
RESET The printer is being reset.
PRESS PAUSE
BUTTON The printer is waiting for a trigger signal to start
media initialization.
PAPER OUT No media is set in the printer.
LOAD xxx PAPER The set media is different from the driver setting
concerning the Roll/Sheet media setting.
LOAD PAPER The paper lever is set to the released position.
PAPER JAM Paper is jammed in the printer.
FRONT COVER OPEN The front cover is open.
PAPER NOT CUT A paper cut error has occurred.
PAPER NOT
STRAIGHT The paper is not loaded straight.
RELOAD PAPER The printer cannot detect any paper.
INK COVER OPEN The ink compartment cover is open.
INK OUT Ink cartridge(s) is (are) empty.