Epson Stylus Photo 720, Service Manual

Page: 106 / 154

EPSON Stylus Photo 720 / EPSON Stylus Photo EX3 Revision A
Adjustment Adjustment by Adjustment Program 106
5.3.7 Bi-Directional Adjustment
This adjustment is to correct differences in printing positions, which is caused by
slippage of printing timing in right and left directions during the Bi-directional
printing. Print the check pattern of the adjustment program and write the corrected
value in the EEPROM. The following is the adjustment procedure.
1. From the adjustment program main menu, select “Bi-Directional adjustment”. The
following screen appears.
Figure 5-19. Bi-Directional adjustment
2. Select “Print the Bi-D adjustment pattern” and click “OK”. The following screen
appears and the Bi-D adjustment pattern will be printed.
Figure 5-20. Print the Bi-D adjustment pattern
Figure 5-21. Bi-d Print Pattern
3. The central lines of the print pattern show the current adjustment value. Check the
central lines of the print pattern. If all three lines are aligned, the adjustment is not
required. If the central three lines are not aligned, you have to input the appropriate
value. The following steps are the adjustment procedure.
C H E C K
P O I N T
n
Perform this adjustment when the following repair / service is
made.
n
Replacing or removing the Head
n
Replacing or removing the CR Unit
n
Replacing or removing the CR Motor
n
Replacing or removing the Timing Belt
n
Replacing the Printer Mechanism
n
Replacing the MAIN Board
n
When performing this adjustment, use of super fine paper is
recommended.
B i - d
M u l t i - S h o t - d o t
d a t a = 1 6 d a t a = 1 8 d a t a = 2 0
d a t a = 1 6 d a t a = 1 8 d a t a = 2 0
V a r i a b l e - d o t 6 p l
Current
Adjustment Value