32
Maintaining Your CX4600
3. Press and release the
B
ink button. The ink cartridge holder moves to the
check position and the
On
and
B
ink lights flash. If one of the cartridges is
low or empty, the CX4600 moves that cartridge to the
_
ink out mark.
Note:
Do not hold down the
B
ink button; when held down for 3 or more seconds, it tells
the printer to start cleaning the print head.
Caution:
Do not move the print head by hand; this may damage the CX4600. Always press
the
B
ink button to move it.
4. Press the
B
ink button again.
■
If more than one cartridge is empty or low, the next cartridge moves to
the
_
ink out mark.
■
If all of the empty or low ink cartridges have been identified, the print
head moves to the ink cartridge replacement position when you press the
B
ink button.
CX4600.book Page 32 Friday, May 28, 2004 1:48 PM
