If you are using the serial interface, choose your printer driver
as described in the following section, “Using the serial interface
connection.” If your system is connected to an AppleTalk
network, see “Using the AppleTalk connection” on page 2-30.
Note:
If you are using a Macintosh Quadra 950 or 900, you need to choose
Compatible
in the Serial Switch dialog box before selecting your
printer from the Chooser. To open the Serial Switch dialog box, choose
Control Panel
from the Apple menu, then choose
Serial Switch
.
Using the serial interface connection
1. Make sure the printer is connected to your Macintosh and
turned on.
2. Choose
Chooser
from the Apple menu. Then click the
EPSON Stylus(EX)
icon and the port your printer is
connected to.
Note:
If you don’t see the EPSON Stylus(EX) icon, use the arrows on
the right to scroll through the available icons.
picture4
2
R
Easter2 Ref. Guide
Rev.b
A5 size
Chapter 2
05-28-97
DR, pass 3
Getting Started
2-29
Summary of Contents for Stylus Color 800
