61
Chapter 6
Measuring Distance and Pace with the Stride Sensor (SS-700/SS-500 Only)
4
Use / to highlight [ON], and then press .
After confirming the selection, the [Settings] screen is displayed.
When [Stride] is set to [ON], is displayed on the chronograph, exercise, and
interval measurement screen.
5
Hold down for at least two seconds to return to the
[Menu] screen.
To turn this function off, select [OFF] in step
4
.
If a GPS signal is not received while using the chronograph, exercise, or interval
functions, you can perform distance and pace measurement with the stride sensor.
You can check that the stride sensor is enabled by the measurement icon on the
screen.
Measurement screen: Chronograph
On: The stride sensor is enabled.
