Epson SS-300B User Manual Download Page 119

Page: 119 / 142

119

Chapter 10

Data Management Using the Web Application

10-2 Connecting the device to a computer and using NeoRun

Connect the device to the computer on which NR Uploader is installed.

Connect the USB cable to the computer on which

NR Uploader is installed and to the cradle.

Place the product into the cradle.

Do not place the device in the cradle if it is wet from water or sweat.

Match the direction of the EPSON logo on the product with the EPSON logo
on the cradle, and then press until it is fixed in place.

Caution

Make sure the device is placed in the
correct direction. A problem could
occur if it is forced into the cradle in
the wrong direction.

NR Uploader starts.

If NR Uploader does not start, the device has not been recognized by the computer.
Update the driver software (

P. 121

Summary of Contents for SS-300B















































































































































Search results

Summary of Contents for SS-300B

Reviews:

Related manuals for SS-300B

Brands by name

Popular brands

Epson SS-300B, User Manual

Search results

Summary of Contents for SS-300B

Reviews:

Related manuals for SS-300B

Brands by name

Popular brands