Epson SC-S30600, Service Manual

Page: 54 / 312

SC-S30600 Series Revision B
TROUBLE SHOOTING Trouble on Paper Feeding 54
Confidential
Actual margins differ from the specified
margins.
Paper feed amount is not configured
correctly.
---
Perform the Feed Adjustment. (Page 263)
The Media Size Check function has
been disabled.
---
Enable (select “ON”) the Media Size Check
function. (The printer is not capable of precisely
correcting less than 2 mm differences.)
The Media End Check function has
been disabled.
---
Enable (select “ON”) the Media End Check
function.
The Tension Check function has been
set to OFF.
---
Set the Tension Check function to other than OFF.
The end of Roll paper is not detected and
paper falls.
Roll paper whose end edge is secured to
the core was used with the Tension
Check function set to OFF.
---
Make either one or both of the following settings.

Set the Tension Check function to other than
OFF.

Enable (select “ON”) the Media End Check
function.
The Tension Check function has been
set to OFF with the Media End Check
function disabled.
---
Make either one or both of the following settings.

Set the Tension Check function to other than
OFF.

Enable (select “ON”) the Media End Check
function.
Roll paper is reeled off at a slant, or the
reeled-off paper gets wrinkled.
The tensioner has become distorted for
some reason. (It can be distorted if
excessive force is applied.)
See the following “How to Check and Correct Tensioner Distortion”.
Table 2-3. Trouble on Paper Feeding
Symptom Cause Check Item Remedy