V
Attach the media rolling plates at either end of
the media.
Sliding media holding plates
While holding the tabs of the media holding plate
on both sides, move the plate to the top edge edge
of the media. Move so that the leading edge of the
media is aligned to the center of the round holes
in the media holding plates.
Insertable media holding plates
Position the media holding plates, while the
media is placed over them, in such a way that each
edge of the media is aligned to the middle of a row
of the round holes in the media holding plates.
(1) Align the white lines of the media holding
plates with the white lines of the platen.
(2) To keep the plates from lifting, push them
down until you hear a clicking sound.
c
Important:
❏
Do not use the media holding plates with
media that is more than 0.4 mm thick.
The media holding plates could touch
and damage the print head.
❏
Always position the plates so that the
edges of the media are at the centers of the
round holes. Incorrect positioning causes
banding (horizontal banding, tint
unevenness, or stripes) during printing.
❏
Move the media holding plates to the left
and right edges of the platen when they
are not in use.
❏
Do not use the media holding plates if the
sides of the printed media are smudged or
torn.
W
Close the front cover.
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Basic Operations
42
