7. Multi-Programming
20
Seiko Epson Corporation
S5U1C17001Y23 Multi-Programmer
System Manual (Rev. 1.1)
7. Multi-Programming
7.1 Entering ID Number
Enter the same ID number as that set in the [Load Program To ICDmini] window to the [ID No.] fields in the
[GangWriter] window to associate the target numbers in the [GangWriter] window and the ICDminis connected
to the PC.
Figure 7.1.1 ID Number Setting in Gang Writer Main Window
7.2 Connecting with Target System
Each target system is connected to the 4-pin target interface connector and the 4-pin flash memory programming
power supply connector of each ICDmini.
Figure 7.2.1 Connectors on ICDmini (Left Side View)
1
2
For target conection
For Flash memory programming power supply etc.
Summary of Contents for S5U1C17000Y23
Page 4: ......
