Chapter 3 Installation and Configuration
10
EPSON
S5U13L02P00C100 Evaluation Board User Manual (Rev. 1.0)
JP4 - HIOVDD Source
JP4 is used to select the source for the HIOVDD supply voltage.
When the jumper is at position 1-2, the HIOVDD voltage must be provided to pin 32 on the H1 connector.
When the jumper is at position 2-3, the HIOVDD voltage is provided by the 3.3V power supply of the board.
Note
HI connector is not mounted. There is allocated space for the connector.
JP6 - PIOVDD Source
JP6 is used to select the source for the PIOVDD supply voltage.
When the jumper is at position 1-2, the PIOVDD voltage must be provided to pin 2 on the H4 connector.
When the jumper is at position 2-3, the PIOVDD voltage is provided by the 3.3V power supply of the board.
Note
H4 connector is not mounted. There is allocated space for the connector.
JP8 - GIOVDD Source
JP8 is used to select the source for the GIOVDD supply voltage.
When the jumper is at position 1-2, the GIOVDD voltage must be provided to pin 6 on the H4 connector.
When the jumper is at position 2-3, the GIOVDD voltage is provided by the 3.3V power supply of the board.
Note
H4 connector is not mounted. There is allocated space for the connector.
JP9 - Backlight Power Supply for LCD Panel
The S5U13L02P00C100 Evaluation Board is designed to generate backlight power supply for LCD panel from 3.3V
via the S5U13U00P00C100 USB adapter board or connector H1. The 3.3V must be supplied from the
S5U13U00P00C100 or H1. The S5U13L02P00C100 has incorporated the White LED Driver Controller
(TPS61161A) for the panel backlight. The White LED Driver Controller drives the panel at a constant current. The
S5U13L02P00C100 is capable of changing the output current (20mA, 40mA, 60mA/Max38V).The current is
adjusted by connection of JP9.See Table 3.3: 8-pin jumper setting”“
Note
H1 connector is not mounted. There is allocated space for the connector.
