Chapter 4 Technical Description
20
EPSON
S5U13515P00C100 Evaluation Board User Manual (Rev 1.1)
4.7 Camera / I2C Interface
The S2D13515 Display Controller has a Camera interface. All the camera interface signals are available on
connector H10. To control the camera, the S2D13515 Display Controller has an I2C master interface. The SDA and
SCL signals are pulled high to CM1VDD by 2.2 k
Ω
resistors and are available on connector H10. The reset signal
provided on H10 is active low and is pulled to HIOVDD when inactive.
Connector H10 is a 0.1” x 0.1”, 20-pin header (10 x 2). The following figure shows the location of the connector
H10.
Figure 4-5: Camera Connector Location (H10)
For the pinout of connector H10, see Section Chapter 6, “Schematic Diagrams” on page 29.