S5U13709 Evaluation Board User Manual
4.1 P1, P2 Host Interface Connector
The S5U13709P00C100 Evaluation Board is designed to connect to a S5U13U00P00C100 USB
Interface Board. The USB Interface Board provides a simple connection to any computer via
USB 2.0 connection. The S5U13709P00C100 directly connects to the USB Interface Board
through connectors P1 and P2.
When the S5U13709P00C100 is connected to the S5U13U00P00C100, there is a LED on the
S5U13U00P00C100 which provide a quick visual status of the power supply (5V). And
S5U13709P00C100 has a LED too. This LED indicates that the 3.3V power is supplied. P1 and
P2 connectors are 2mm pitch, dual row, and 40-pin female headers (20x2).
Note
A windows driver must be installed on the PC when the S5U13709P00C100 is used with the
S5U13U00P00C100 USB Interface Board. The S1D13xxxUSB driver is available
at
.
4.2 H1, H2 Host Interface Connector
When the S5U13709P00C100 Evaluation Board connects with the S5U13U00P00C100 USB
Interface Board,
H1 and H2 connectors can be used as monitor terminals.
The S5U13709P00C100 is designed to connect to a S5U13U00P00C100. But H1 and H2
connectors allow a variety of development platforms to be used with the S5U13709P00C100.
When not used with the S5U13U00P00C100, please supply the 5V power to TP1 terminal.
4.3 H3, H4 Panel Interface Connector
The LCD interface uses the FPFRAME, FPSHIFT, FPDRDY, FPLINE and FPDAT [3:0] pins. All
signals on these pins are available on connectors H3 and H4. Connectors H3 and H4 are
2.54mm pitch, dual row, and 40-pin female headers (20x2).
12 EPSON S5U13709P00C100 Evaluation Board User Manual Rev. 1.00
