Epson RX690 Series, Operation Manual

Page: 21 / 52

Printing from a Memory Card
21
English
4. On the LCD screen, make sure Print
Photos from Index Sheet is selected,
then press OK .
5. Press
x
Start .
Note:
If you have more than one index sheet, wait
each time until printing is complete. Then
repeat the steps above to scan and print
from each additional sheet.
Printing onto a CD/DVD
Making settings and printing
1. Press
v
Specialty Print .
2. Select Print on CD/DVD , then press OK .
3. Select the layout, then press OK
(
&
“Print settings for Print on
CD/DVD” on page 48).
Note:
When selecting photos for the
CD/DVD
4-up
or
CD/DVD Variety
layout setting, you
do not have to select the maximum number
of photos. Unused areas of the layout will be
left blank.
4. Press OK .
5. Select a photo and set the number of
copies.
6. Press
x
Menu and change the settings
(
&
“Print settings for Print on
CD/DVD” on page 48). Then press OK .
Tip:
If you want to print a test sample on paper
first, select
Plain Paper as the Paper Type .
7. Press
x
Start .
Adjusting the print area
Adjusting the diameter
1. Press
v
Specialty Print .
2. Select Print on CD/DVD , then press OK .
3. Select the layout, then press OK .
4. Press OK .
5. Press
x
Menu .
6. Select CD Inner-Outer , then press
r
.
7. Set the inside diameter (Inner) and the
outside diameter (Outer), at intervals of
1 mm, and then press
OK .
Note:
If you are printing in the following areas of
the disc, the disc or CD/DVD tray may get
stained with ink.
8. Press OK , then try printing again.
Adjusting the print position
1. Press
F
[ Setup ].
2. Select the CD/Sticker Position , and
press OK .
3. Select CD/DVD , then press
r
.
Inner 18 to 46 mm
Outer 114 to 120 mm
Inner hub area 18 to 42 mm
Outer periphery
area 117 to 120 mm