29
Note:
If you see
–––
on the display or the
HR
icon is flashing, the watch has not detected your heart
rate. Make sure you are wearing the watch correctly and try again. If your heart rate often reads less
than 120 beats while running or 70 beats while walking, you may have a naturally low heart rate. This
can cause incorrect heart rate measurements. Set the
HR Measurement
option to
Settings 2
in the
Epson View app to correct the issue.
Parent topic:
Related references
Time Screen Menus
Solutions to Watch Settings Problems
Displayable Workout Measurements
Activity Data Displayed on Your Watch
Related tasks
Selecting Heart Rate Mode for Activities
Calculating Your Stride Length
Your watch automatically calculates your stride length so it can accurately measure distance and pace
data in locations with poor GPS signal reception, such as indoors or in tunnels.
The first time you use your watch, run or walk outdoors in an open area for approximately 10 minutes.
You can also run or walk between tall buildings or trees for at least 30 minutes. This allows your watch to
learn your normal stride length. You should only need to perform this step once.
Note:
Do not cross your arms or hold onto the treadmill handles or the stride sensor may not detect your
movement.
Parent topic:
Adjusting the Watch Display
You can adjust the display on your watch to suit your environment and other preferences. You can also
customize the watch's vibration settings.
1.
At the Time screen, press the
Enter button.
