Epson Pro Cinema 4050 User Manual Download

Page: 143 / 176

143

Parent topic:

Solving Problems

Related references

Projector Setup Settings - Extended Menu

Solving Image Problems

Check the solutions in these sections if you have any problems with projected images.

Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions When a 3D Image Does Not Display Correctly

Parent topic:

Solving Problems

Solutions When No Image Appears

If no image appears, try the following solutions:

• Make sure the lens cover is open all the way.

• Press the

Blank

button on the remote control to see if the image was temporarily turned off.

• Make sure all necessary cables are securely connected and the power is on for the projector and

connected video sources.

• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected

computer is in sleep mode or displaying a blank screen saver.

• Press the

Menu

button. If the projector menu is able to display, there may be a problem with the

connected video source, cable connection, or port.

• Check the settings on the Signal menu to make sure they are correct for the current video source.

Summary of Contents for Pro Cinema 4050

















































































































































































Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands

Epson Pro Cinema 4050, User Manual

Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands