Epson Pro Cinema 4050 User Manual Download

Page: 148 / 176

148

Input Signal Settings - Signal Menu
Supported Video Display Formats

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projector lens.

• Check the lens for condensation.

Note:

To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Position the projector close enough to the screen, and directly in front of it.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Adjust the

Sharpness

setting to improve image quality.

• If you are projecting from a computer, display a uniformly patterned image on the screen and adjust

the

Tracking

and

Sync

settings.

• If you are projecting from a computer, adjust the computer's resolution to match the projector's native

resolution, if possible.

• Check the resolution of your video source. If you are projecting from a standard definition video

source, your image will not be as clear as an HD (720p/1080i/1080p) video source.

Parent topic:

Solving Image Problems

Related references

Image Quality Settings - Image Menu
Projection Distance

Summary of Contents for Pro Cinema 4050

















































































































































































Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands

Epson Pro Cinema 4050, User Manual

Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands