Epson Pro Cinema 4050 User Manual Download Page 131

Page: 131 / 176

131

Resetting the Lamp Timer

Parent topic:

Projector Maintenance

Related references

Projector Information Display - Info Menu
Projector Lamp Specifications
Optional Equipment and Replacement Parts

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning:

Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

Turn off the projector and unplug the power cord.

Allow the projector lamp to cool down for at least one hour.

Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.

Warning:

If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side
of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you
open the lamp cover.

Summary of Contents for Pro Cinema 4050

















































































































































































Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands

Epson Pro Cinema 4050, User Manual

Search results

Summary of Contents for Pro Cinema 4050

Reviews:

Related manuals for Pro Cinema 4050

Brands by name

Popular brands