manualshive.com logo in svg

Epson PriorityFAX 3000, Owner'S Manual, Page: 72 / 122

Share
Download
Epson PriorityFAX 3000 Owner'S Manual Download Page 72

PriorityFax 3000 Manual

Using Broadcasting

Enter the number of minutes you would like the automatic redial

feature to wait between tries of the fax number in the event of a

busy signal. Use a zero before a single-digit entry, such as 03 for

three minutes.

Press SET three times to return to the date/time display.

Broadcasting allows you to send the same document to several

different fax machines in one operation. Broadcasting requires that

you have already set up one-touch and/or speed dial numbers and

assigned them to groups, as described in Chapter 2. If one-touch

and/or speed dial number groups have been registered, follow

these steps:

Insert a document face down in the feeder. The ready display
appears:

FAX/COPY READY

STD

NORMAL

Press FUNCTION.

Press 7 to enter the special mode.

SPECIAL MODE

OFF

Use the * or # cursor key to select the following display:

-SPECIAL

BROADCAST

Press 

SET twice.

FAX:

4 - 8

Summary of Contents for PriorityFAX 3000



























































































































Reviews:

No comments