manualshive.com logo in svg

Epson PriorityFAX 3000, Owner'S Manual, Page: 42 / 122

Share
Download
Epson PriorityFAX 3000 Owner'S Manual Download Page 42

Using the PriorityFax

Use the keypad to enter the correct numbers in the display. Ignore

the slashes and the colon. They appear automatically. If you make

a mistake, use the 

l 

cursor key to move the cursor to the incorrect

digit, and enter the correct one.

When the date and time are correct, press SET twice. Now the

new date and time are registered and appear on the display.

Registering Your Number

and Name

After you use the following procedure to register your number

and name, they are automatically printed (along with the page

number) at the 

top of each page of each document you send. This

makes it easy for the recipients of your faxes to identify and keep

straight all the pages you send.

To register your fax number and name, perform the following

steps:

Make sure no document is in the machine.

Press FUNCTION.

Press 1 to choose the register mode.

REGISTER(1-9)?

Press 1. You see the following display:

R T I / T T I

FAX:_

2-15

Summary of Contents for PriorityFAX 3000



























































































































Reviews:

No comments