manualshive.com logo in svg

Epson PriorityFAX 3000, Owner'S Manual, Page: 66 / 122

Share
Download
Epson PriorityFAX 3000 Owner'S Manual Download Page 66

PriorityFax 3000 Manual

If you have not registered the receiver’s name as described in

Chapter 2 or if you dial without using the one-touch button or

the speed dial buttons, only the number, not the name, of the

recipient appears in the fax back message.

Make sure nodocument is in the machine.

Press FUNCTION. The following display appears:

FUNCTION (0-8)?

Press 0 to enter the fax back message mode.

FAX BACK MSG

ON

Press SET.

FAX:

Setting the
Resolution

Dial the fax number and press START.

The PriorityFax has three resolutions: standard (std), fine, and

photo. Standard is the factory setting. If your ongoing resolution

needs are different from standard, you can register either fine or

photo with the following procedure. Then all your documents are

sent at the new resolution you have chosen, unless you change the

setting for an individual document as explained in Chapter 2.

Summary of Contents for PriorityFAX 3000



























































































































Reviews:

No comments