manualshive.com logo in svg

Epson PP 408, User Manual

Share
Download
Epson PP 408 User Manual Download Page 8

Preface

Preface

XIII

XIV

E.

Control Codes

Conventions Used in this Guide

Quick reference for IBM ProPrinter and IBM ProPrinter AGM (4207, 4208

The following conventions are used:

XL 24) Emulation.

F.

Control Codes

Quick reference for EPSOM LQ 2550 / ESC/P2 Emulation.

Note:

Contains special advice to facilitate handling. 

G.

Control Codes

Caution:

Contains important information to prevent damage

Quick reference for Barcode programming.

of the equipment.

H.

Verschiedenes / Miscellaneous

[ENTER]

Key functions are always depicted in brackets or

S

Bestellnummern / Ordernumbers

indicated by the symbol e.g. 

.

S

System Manager Information

Bold

Headlines and important information.

Note!

The following chapters describe the two printers:

S

PP 407 Fanfold printer without cutter

S

PP 408 Fanfold printer with cutter

The operation of both printers is mostly alike. In most illustrations, the printer

with the cutter is used. In case there are differences in the handling you will find:

S

for the PP 407 the note 

printer without cutter

S

for the PP 408 the note 

printer with cutter

Summary of Contents for PP 408








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands