Epson PP-100II Page 97 User Manual Download

Page: 97 / 143

Maintaining Your Product

Using the Head Cleaning Utility

Follow the steps below to clean the print head using the head cleaning utility.

1. Make sure the product is turned on.

2. Make sure no lights indicate errors and the disc cover is closed.

3. Access the printer driver.

See “Accessing the Printer Driver” on page 21.

4. Click the

Utility

tab; then click the

Head Cleaning

button.

5. Follow the on-screen instructions.

The

Power light flashes while the product performs the cleaning cycle.

Caution:

Never turn off the product while the

Power light is flashing. Doing so may damage the

product.

Note:

❏

If print quality has not improved after repeating this procedure about four times, turn the product
off and wait at least six hours. Then run the nozzle check again and repeat the head cleaning if
necessary.

❏

If the print quality still has not improved, at least one of your ink cartridges may be old or
damaged and may need to be replaced.

See “Replacing an Ink Cartridge” on page 91.

Summary of Contents for PP-100II
















































































































































Search results

Summary of Contents for PP-100II

Reviews:

Related manuals for PP-100II

Brands by name

Popular brands

Epson PP-100II, User Manual

Search results

Summary of Contents for PP-100II

Reviews:

Related manuals for PP-100II

Brands by name

Popular brands