manualshive.com logo in svg

Epson PP-100II, User Manual, Page: 110 / 143

Share
Download
Epson PP-100II User Manual Download Page 110

Troubleshooting

110

Error associated with ink

Stacker 4 is full

Remove published discs from stacker 4.

Stacker 4 is open

Close stacker 4.

Lights

Conditions/Remedies

Power

Busy

Error

Ink

Stacker

1

2

3

4

Ink low

Obtain a replacement ink cartridge. To 
determine which cartridge is low, check the 
ink cartridge status.
See “Checking the Ink Cartridge Status” on 
page 89.

The ink has reached its replacement time or it 
is not installed correctly.

Replace the ink cartridge or reinstall it. 

If the ink cartridge is not recognized even if it 
is installed correctly, there may be dirt on the 
green circuit board. Wipe it with soft cloth 
and install it again. 

The product will stop operation before ink is 
completely empty in order to maintain print 
head quality. Therefore, some ink will be left 
in the ink cartridge. 

It is recommended to use a genuine ink 
cartridge.

Ink cartridge not fully inserted

All Ink lights are on.
Check ink cartridges and make sure they are 
all fully inserted.

Lights

Conditions/Remedies

Power

Busy

Error

Ink

Stacker

1

2

3

4

Summary of Contents for PP-100II
















































































































































Reviews:

No comments