Managing Projectors
115
6. Do one of the following:
■
If your network assigns addresses automatically, turn on the
DHCP
setting.
■
If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
, and
Gateway Address
.
To enter numbers, use the
pointer button on the remote
control to highlight the number you want to input, then press
the
Enter
button.
7. When you’re done making all necessary changes, select
Return
,
select
Setup complete
, and then select
Yes
to confirm that you
want to save the changes. Press
Menu
to exit.
PowerLite Pro G5200WNL
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
LAN
port on the projector. See page 37.
2. Turn on the projector.
3. Press the
Menu
button on the remote control, select the
Network
menu, then press
Enter
. You see the following screen:
4. Choose
Wired LAN
and press
Enter
.
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.
Summary of Contents for PowerLite Pro G5200WNL
