Epson PowerLite 737c Projector
16
-
Epson PowerLite 737c Projector
2/05
4. Once the name of your projector appears, select it and click
Connect
. If more than one projector is listed, you can select
up to four additional projectors and connect to them at the
same time. If the selected projector is being used by another
person, you can still connect to it; doing so automatically
disconnects the other user.
5. If you are prompted for a keyword, enter the four-digit
number displayed on the EasyMP Network screen and
click
OK
.
6. Once the connection is established, you see your computer’s
image transmitted to the projection screen, and a floating
control bar:
7. From the control bar, you can access these NS Connection
features:
8. When done with your presentation, click
Disconnect
on the
control bar.
Connecting in IP Connect Mode
Even if your projector and computer are on different subnets
(access point mode only) or connecting over different routers,
you can establish a connection manually using IP Connect
Mode.
1. Start NS Connection on the computer to which you want
to connect. You see this screen:
2. Click the
Extension
button. You see this screen:
Provides help for NS Connection.
Lists projectors and specifies which ones are in use.
Lets you access the projector’s menu system from an
HTML browser window.
Lets you keep the projected image on the screen,
even if the image on your computer changes.
Turns off the image and sound.
Lets you zoom in on a part of the image.
Lets you change the brightness, contrast, and color
mode.
Lets you switch between the
Video
and
S-Video
ports.
Click here to minimize
Lets you switch between the computer and EasyMP.
Flashes three lights in sequence when the computer
and projector connection is active.
Click here
