Epson PowerLite 1260, User Manual

Page: 28 / 126

28
Setting Up the Projector
PowerLite 1260 (16:10 image)
Projector Placement Options
When projecting from the front, you should place the projector
directly in front of the center of the screen, facing the screen squarely.
The center of the lens should be about level with the bottom of the
screen.
If you place the projector below screen level, you may need to tilt it up
by extending the front adjustable foot. Tilting the projector causes the
image to become “keystone” shaped, but you can correct the
distortion (see page 49). The PowerLite 1220/PowerLite 1260 may be
able to correct the distortion automatically.
Diagonal screen
size Projection distance (A)
Wide to Tele
Offset (B)
40 inches
(102 cm) 44 to 53 inches
(111 to 134 cm) –3 inches
(–8 cm)
50 inches
(127 cm) 55 to 66 inches
(139 to 168 cm) –3.8 inches
(–10 cm)
60 inches
(152 cm) 66 to 79 inches
(168 to 202 cm) –4.5 inches
(–12 cm)
80 inches
(203 cm) 88 to 106 inches
(225 to 270 cm) –6.1 inches
(–15 cm)
100 inches
(254 cm) 111 to 133 inches
(281 to 338 cm) –7.6 inches
(–19 cm)
150 inches
(381 cm) 167 to 200 inches
(424 to 509 cm) –11.4 inches
(–29 cm)
200 inches
(508 cm) 223 to 268 inches
(566 to 680 cm) –15.1 inches
(–38 cm)
320 inches
(813 cm) 357 to 429 inches
(907 to 1089 cm) –24.2 inches
(–62 cm)
note
After positioning the
projector, you may want to
connect a Kensington
MicroSaver
®
anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
page 17
.
Front projection