Epson PowerLite 118, User Manual

Page: 124 / 234

124
Note:
The default password is set to
0000
.
1. Hold down the
Freeze
button on the remote control for about seconds or until you see this menu.
2. Press the down arrow to select
Password
and press
Enter
.
You see the prompt "Change the password?".
3. Select
Yes
and press
Enter
.
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
6. Press
Esc
to return to the menu.
7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
Password Security Types