!
Caution:
Do not touch the white cable inside the printer.
1. Turn off the printer.
!
Caution:
Whenever you turn off the printer, wait at least five seconds before turning it back on;
otherwise you may damage the printer.
2. Open the cover and press the release lever to move the upper mechanism. Then hold the jammed
paper with both hands and pull it out of the printer. If you can clear the paper jam, move the upper
mechanism to its original position by pulling the release lever and then close the printer cover. If it
is difficult to do so, go to the next step.
!
Caution:
Make sure that you move the upper mechanism by pulling the release lever. Do not pull the
mechanism by hand. It may damage the printer.
3. Turn on the printer while pressing the
F1/Eject
button. The printer is in the paper removing mode
and ready to start feed operations. See the table below to find out how the
F1/Eject
and
Offline
buttons work in this mode and execute the appropriate operation.
Paper removing mode operation
PLQ-35 User’s Guide
Troubleshooting
52
