3-8 Connecting to Your Computer
Setting the Camera’s Clock
PhotoPC 500 can record the time and date of your photos
automatically. When you transfer the pictures to the
computer, you can see exactly when each one was taken.
In order to have the time and date recorded, you need to set
the camera’s clock from the computer. The PhotoPC 500
clock will continue to keep time accurately until you
replace the batteries; at that point you will have to connect
the camera to your computer again and reset the clock.
Follow these steps to set the camera’s clock:
1
Connect the camera to the computer and open the
Setup screen as described earlier in this chapter.
The Time and Date boxes show the current settings of
your camera’s internal clock.
2
Click the
Set Time
button.
You see a screen like the one below:
3
Click the
Copy From Computer
button to set the
camera to the computer’s date and time.
You can also click the arrows to change the setting or
type the numbers for the time and date in the boxes.
4
When you are done, click
OK
. EPSON Photo! updates
the time and date in your camera.
click to use
computer’s settings
click arrows to
change time and date
pc-3.fm5 Page 8 Friday, November 1, 1996 10:51 AM