Epson PhotoPC 2100Z, Service Manual

Page: 69 / 108

PhotoPC 2100Z Revision E
Adjustment Adjustment 63
†
6: AF adjustment error
„
Corrective action
Check the conditions under which the adjustment is performed. Perform the
adjustment again and if a similar error recurs, replace the Lens Assy (with
CCD) with a new one.
†
20: Adjusted value writing error
„
Corrective action
Check the conditions under which the adjustment is performed. Perform the
adjustment again and if a similar error recurs, replace the PCB-MCU Assy
with a new one.
†
30: Camera adjustment execution error
„
Corrective action
Check the conditions under which the adjustment is performed. Perform the
adjustment again and if a similar error recurs, replace the PCB-MCU Assy
with a new one.
†
40: Brightness box error
„
Corrective action
Check the conditions under which the adjustment is performed. Perform the
adjustment again and if a similar error recurs, replace the Lens Assy (with
CCD) with a new one.
5.3 Adjustment
5.3.1 Installation of firmware
5.3.1.1 Version Confirmation
1. Press the F Button and the SCROLL Button simultaneously, and the camera will enter
SETUP mode.
C A U T I O N
These errors may occur on rare occasions. If any error occurs,
first check the conditions under which the adjustment is
performed.
Once the camera is disassembled or a new component or unit is
installed, be sure to check for proper reassembly or installation,
especially for proper connection of connectors.
Shutter Button
Lens Cover Switch