13
Chapter 1 Product Overview
1
Environmental Specifications
However, the surface temperature for the wireless LAN unit is less than 70°C {158°F}.
Limitations for wireless communication
The transmission of the radio waves cannot be stopped. The only way to stop the transmission of radio
waves is to turn the TM printer off.
Countries where this product can be used are limited. Since notes are provided for each country,
check the manual supplied with the product.
When setting the encryption type, there are the following restrictions:
WPA-PSK/WPA2-PSK/WPA2-Enterprise are not available in the ad hoc mode.
When using the OT-WL05 in the ad hoc mode, printing a status sheet is subject to the following
restrictions
Even if there is no host computer to connect to, “Connect” appears as the Link Status.
Between power-on and the time when the printer to connect is found, “0dBm” appears as the Signal
Level. If the host computer connected to the TM printer discontinues communication, the value that
had been obtained immediately before discontinuation of communication is held appears.
Item
Specifications
Temperature
Operating Conditions
0 to 45°C {41 to 113°F}
*
Storage Conditions
-5 to 50°C {23 to 122°F}
Humidity
Operating Conditions
10 to 90% RH
Storage Conditions
10 to 90% RH
