E
Press the
F
setting button to return to the home screen.
F
After "Configuring network setting" is displayed, restart the unit.
Note:
Use the Web-based EpsonNet Config to make manual settings for IPv6.
Set the password for protecting network security using Web-based EpsonNet Config.
U
“Using EpsonNet Config” on page 13
Using EpsonNet Config
Web-based EpsonNet Config is software that is stored on the Network Interface Unit.
You can launch the software from a computer on the network using a Web browser and so on. You can make network
interface settings (TCP/IP and so on) and scanner settings (various checks and settings).
To start Web-based EpsonNet Config, enter the IP address for this unit in the address bar of a Web browser.
Note:
❏
Web-based EpsonNet Config cannot be used if the IP address has not been set in the network interface.
❏
See EpsonNet Config online help for more details.
Note:
You can also use EpsonNet Config for Windows/Macintosh.
❏
EpsonNet Config for Windows is a Windows-based configuration utility for administrators that allows you to
configure the network interface for various protocols such as TCP/IP, MS Network, AppleTalk, IPP, and SNMP.
❏
EpsonNet Config for Macintosh is a Macintosh-based configuration utility for administrators that allows you to
configure the network interface for TCP/IP, AppleTalk, and IPP.
Download this software from:
http://www.epson.com/
Operating Environment
You can use Web-based EpsonNet Config on computers with the following Web browsers.
Network Interface Unit User's Guide
Setting Up the Network Interface Unit
13
