background image

If you use an extension cord with the product, make sure the total ampere rating of the devices plugged into the
extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices
plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

Never disassemble, modify, or attempt to repair the AC adapter or product by yourself except as specifically
explained in the product’s guides.

Do not insert objects into any opening as they may touch dangerous voltage points or short out parts. Beware of
electrical shock hazards.

If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses in the plug,
make sure you replace them with fuses of the correct size and rating.

Unplug the product and the AC adapter, and refer servicing to qualified service personnel under the following
conditions: The AC adapter or plug is damaged; liquid has entered the product or the AC adapter; the product or
the AC adapter has been dropped or the case has been damaged; the product or the AC adapter does not operate
normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the
operating instructions.)

Unplug the product and the AC adapter before cleaning. Clean with a damp cloth only. Do not use liquid or
aerosol cleaners.

If you are not going to use the product for a long period, be sure to unplug the AC adapter from the electrical
outlet.

After replacing consumable parts, dispose of them correctly following the rules of your local authority. Do not
disassemble them.

Restrictions on copying

Observe the following restrictions to ensure responsible and legal use of your product.

Copying of the following items is prohibited by law:

Bank bills, coins, government-issued marketable securities, government bond securities, and municipal securities

Unused postage stamps, pre-stamped postcards, and other official postal items bearing valid postage

Government-issued revenue stamps, and securities issued according to legal procedure

Exercise caution when copying the following items:

Private marketable securities (stock certificates, negotiable notes, checks, etc.), monthly passes, concession
tickets, etc.

Passports, driver’s licenses, warrants of fitness, road passes, food stamps, tickets, etc.

Note:

Copying these items may also be prohibited by law.

Responsible use of copyrighted materials

Network Interface Unit     User's Guide

Safety Instructions

5

Summary of Contents for Network Interface Unit


























Reviews: