ESC Dec Hex Symbol
Function
ESC 63 3F ?
Redefines one of the four alternate
graphics codes--“K”, “L”, “Y”, or
"Z"--as one of the seven graphics
density numbers used with the
ESCape
command. Format:
ESC
n
ESC 64 40 @
ESC 65
41 A
ESC 66 42 B
ESC 67 43 C
ESC 67 43 C
where s is K, L, Y, or Z and n is O-6.
Reset code, which resets the printer
to its power-up state, including reset-
ting top of page. Clears all text and
control codes from the print buffer.
Sets line spacing to n/72-inch (n-dot).
Format:
ESC “A” n
where n = O-255.
Sets up to 16 vertical tabs in the cur-
rent line spacing. Tab settings are not
affected by subsequent changes in
line spacing. Format:
ESC “B” n
l
n
2
. . .
0
where = 1-255. Terminate this
tab sequence with 0 or a number less
than the last defined tab
Sets the form length to n lines in the
current line spacing. The default is 66
lines. Also resets top of form.
Format:
ESC “C” n
where n = l-127.
Sets the form length to n inches, re-
gardless of the current line spac-
ing. The default length is a set by
the DIP switches. Also resets top of
form. Format:
ESC “C” 0 n
where n = l-22.
B-5
