2
Using the Printer
2-25
R4C4610
Rev. C
A5 size
USING.FM
6/28/00
Pass 3
R
Proof Sign-off:
SEI
Y.Ohkawara K.Kono
K.Kono
SEI
M.Kauppi
About Your Printer’s Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from
the printer’s control panel using the default-setting mode.
The following table lists the default settings and the options you
can select in the default-setting mode. The settings are explained
in detail after the table. For instructions on changing the default
settings, see “Changing default settings” on page 2-30.
Settings
Options
Page length for tractor*
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11, 70/6, 12, 14, 17
Skip over perforation
On, Off
Auto tear-off
On, Off
Auto line feed
On, Off
Print direction
Bi-D, Uni-D
Software
ESC/P, IBM 2380Plus
0 slash
0,
High speed draft
On, Off
I/F mode
Auto, Parallel, Serial
Auto I/F wait time
10 seconds, 30 seconds
Baud rate
19200, 9600, 4800, 2400, 1200, 600, 300 BPS
Parity
None, Odd, Even, Ignore
Parallel I/F bidirectional
mode
On, Off
Packet mode
Auto, Off
0