Epson LX-300, Manual

Page: 1 / 12

3ULQWHUý6SHFLILFDWLRQVý
Printing
Printing method: 9-pin dot matrix
Print speed:
3ULQWLQJýPRGH &KDUDFWHUýVL]HV 0D[LPXPýSULQWLQJýVSHHG
'UDIW ìíýFSL ëëíýFSV
'UDIW ìëýFSL ëçéýFSV
'UDIWýFRQGHQVHG ìæïìýFSL ìååýFSV
'UDIWýFRQGHQVHG ëíýFSL ëëíýFSV
'UDIWýHPSKDVL]HG ìíýFSL ììíýFSV
'UDIWýGRXEOHýZLGWK èýFSL ììíýFSV
1/4 ìíýFSL ééýFSV
1/4 ìëýFSL èêýFSV
1/4ýGRXEOHýZLGWK èýFSL ëëýFSV
FSLãýFKDUDFWHUVýSHUýLQFKýýýýýýýýýýýFSVãýFKDUDFWHUVýSHUýVHFRQG
Resolution:
3ULQWLQJýPRGH
+RUL]RQWDO
GHQVLW\
9HUWLFDOý
GHQVLW\
$GMDFHQWý
GRWVýSULQW
'UDIW ìëíýGSL æëýGSL 1Rý
'UDIWýFRQGHQVHG ëéíýGSL æëýGSL 1R
'UDIWýHPSKDVL]HG ìëíýGSL æëýGSL <HV
1/4 ëéíýGSL ìééýGSL 1R
%LWýLPDJH çíýGSL æëýGSL <HV
%LWýLPDJH æëýGSL æëýGSL <HV
%LWýLPDJH åíýGSL æëýGSL <HV
%LWýLPDJH äíýGSL æëýGSL <HV
%LWýLPDJH ìëíýGSL æëýGSL <HV
%LWýLPDJH ìëíýGSL æëýGSL 1R
%LWýLPDJH ëéíýGSL æëýGSL 1R
Printing
direction: Bidirectional with logic-seeking for draft
with monochrome ribbon. Unidirectional
for NLQ text, bit image, and color printing.
Line spacing: 1/6 inch, 1/8 inch, or programmable in
1/216-inch increments
Paper feed speed: 79 milliseconds per 1/6-inch line
2.78 inches/sec. for continuous paper
Buffer: Approximately 4 KB
Internal fonts and character tables
Bitmap fonts: EPSON NLQ Roman
EPSON NLQ Sans Serif
EPSON Draft
Draft condensed
Character tables: 1 italic and 8 graphics character tables
Character sets: 13 international character sets
Paper
Single sheets (CSF):
Width 210 mm (8.5 inches)
Length 297 mm (11.0 inches)
Thickness 0.065 to 0.14 mm (0.0025 to 0.0055 inches)
Weight 64 to 90 g/m
2
(18 to 24 lb)
Quality Bond paper, plain paper, recycled paper
Single sheets (manual insertion):
Width 182 to 257 mm (7.2 to 10.1 inches)
Length 182 to 364 mm (7.2 to 14.3 inches)
Thickness 0.065 to 0.14 mm (0.0025 to 0.0055 inches)
Weight 52 to 90 g/m
2
(14 to 24 lb)
Quality Bond paper, plain paper, recycled paper
Note:
Use 90 g/m
2
paper under normal temperature and humidity
conditions only.
Continuous paper:
Width 102 to 254 mm (4 to 10 inches)
Copies Three sheets (one original plus two copies)
Thickness 0.065 to 0.25 mm (0.0025 to 0.0098 inches)
total
Weight 52.3 to 82 g/m
2
(14 to 22 lb) for one sheet
40 to 58.2 g/m
2
(12 to 15 lb) per sheet in
multi-part forms
❏
Use only two- or three-part carbonless multi-part
forms fed with the tractor.
❏
When using side-crimped multi-part forms, raise the
paper guide to keep the printing position accurate.
❏
When using the push tractor, the printing position for
the last page may not be accurate because the page
comes off the tractor.
Pause LF/FF Font
Paper Park
Micro Adjust
1 2
Roman
Sans Serif
D r a f t
Draft Condensed
3sec
(3621ý/;ðêíí
,QNý-HWý3ULQWHUV éîëëîäé (3621ý/;ðêííðì