Epson LX-1170+II User Manual Download Page 55

Page: 55 / 159

Note:

Click the

Default

button to revert all items to the default settings.

Accessing EPSON Status Monitor 3

Do one of the following to access EPSON Status Monitor 3;

❏

Double-click the printer-shaped shortcut icon on the taskbar.
To add a shortcut icon to the taskbar, go to the Utility menu
and follow the instructions.

❏

Open the Utility menu, then click the

EPSON Status Monitor

icon. To find out how to open the Utility menu, See “Using

the Printer Driver with Windows Me and 98” or “Using the
Printer Driver with Windows XP, 2000, and Windows NT
4.0”.

When you access EPSON Status Monitor 3 as described above, the
following printer status window appears.

You can view printer status information in this window.

Summary of Contents for LX-1170+II
































































































































































Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands

Epson LX-1170+II, User Manual

Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands