82
Software
When you select
ESC/P
, the printer operates in the EPSON ESC/P
mode. When you select
IBM 2380 Plus
(for LX-300+II)/
IBM 2381
Plus
(for LX-1170II), the printer emulates an IBM printer.
0 slash
The zero character has a slash ( ) when this feature is turned on.
It has no slash (0) when this feature is turned off. The slash allows
you to easily distinguish between the uppercase letter
O
and a
zero.
High speed draft
When you choose
On
, the printer prints up to 300 cps (characters
per second) at 10 cpi (characters per inch). When you choose
Off
,
the printer prints up to 225 cps at 10 cpi.
I/F (interface) mode
The printer comes with three kinds of interfaces; a parallel
interface, a serial interface and a USB interface.
If your printer is connected to only one computer, choose
Parallel
,
Serial
, or
USB
for the interface mode, depending on the interface
you use. If your printer is connected to two computers, select
Auto
(automatic) to allow the printer to automatically switch
between interfaces depending on which one is receiving data.
Auto I/F (interface) wait time
This setting takes effect only when
is set
to
Auto
. This setting determines how long the printer waits when
it no longer receives data from an interface before it checks
whether a print job is being sent through the other interface. You
can specify
10 seconds
or
30 seconds
for the auto interface wait
time.
Summary of Contents for LX-1170+II
Page 1: ...User s Guide NPDxxxx 00 ...
Page 13: ...13 Glossary Index ...
