Epson LQ-1010, User Manual

Page: 276 / 308

Commands Arranged by Topic
Word Processing
ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC a n
27 97 n
1B 61 n
Select Justification
Comments:
Sets the type of justification.
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when
the buffer becomes full; HT and BS are invalid except in n = 0
mode. For n = 3 there must be no carriage returns within a
paragraph.
ESC SP (space)
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC SP n
27 32
n
1B 20 n
Set Intercharacter Space
Comments:
Sets the amount
of
space added to
the
right of
each
character, in
addition to the space already allowed in
the
design of the character.
The number of dots is determined by n, which should be from 0 to
127. Each unit of space is 1/120th of an inch in draft mode and
1/180th of an inch in Letter Quality and proportional modes.
Command Summary 9-33