Epson FX-880 - Impact Printer, Service Manual

Page: 70 / 100

FX-880 Service Manual
Chapter
4 DISASSEMBLY AND ASSEMBLY
Rev. A 4-21
4.2.10.9 Rear Paper Guide Assembly Removal
1. Remove the printer mechanism. (See Section 4.2.9.)
2. Remove the Platen. (See Section 4.2.8.)
3. Remove the hexagon nut and the washer securing the LEVER,G,ADJUST to the
SHAFT,CR,GUIDE, and remove the lever. (See Section 4.2.10.8.)
4. Remove the BUSHING,PARALLEL,ADJUST to turn around the SHAFT,CR,GUIDE. (See
Section 4.2.10.8.)
5. Remove the PG Detector. (See Section 4.2.10.4.)
6. Remove the harness of HP Detector.
7. Remove 4 CBS (M3
×
8) screws securing the LEFT FRAME of the printer mechanism, and
remove the LEFT FRAME.
8. Remove the Head FFC from the FRAME,REAR of the PRINTER MECHANISM.
9. Remove 2 CBS (M3
×
8) screws securing the FRAME,REAR to the RIGHT FRAME, and
remove the REAR PAPER GUIDE ASSEMBLY.
10. Push the clip on the bottom of the REAR PAPER GUIDE ASSEMBLY, and slide out the
REAR PAPER GUIDE ASSEMBLY from the FRAME REAR.
C l i p
F R A M E , R E A R
C B S ( M 3 x 8 )
C B S ( M 3 x 8 )
L E F T F R A M E
R E A R P A P E R G U I D E A S S E M B L Y
F R A M E , R E A R
Figure 4-21. REAR PAPER GUIDE ASSEMBLY Removal