Control Panel Buttons and Lights
Font lights
Indicate which font is
selected. To select a font,
see Chapter 5.
Micro Adjust
Using the micro adjust
feature, you can press the
D
and
U
buttons to adjust the
top-of-form or tear-off
position. See Chapter 3.
Paper Out light
•
On when no paper is loaded in
the selected paper source or
paper is not loaded correctly.
•
Flashes when paper has not
been fully ejected or a paper
jam has occurred.
Operate button
Turns the printer on
and off. The printer
is off when the top
of this button is even
with the button
protectors.
Pause button
•
Stops printing
temporarily, and
resumes printing
when pressed again.
•
When held down for
three seconds,
enters the micro
adjust mode. When
pressed again, exits
the micro adjust
mode.
Pause light
•
On when the printer
is paused.
•
Flashes when the
printer is in the micro
adjust mode.
Load/Eject button
•
Loads a single sheet
of paper.
•
Ejects a single sheet
of paper if a sheet is
loaded.
•
Loads continuous
paper from the
standby position.
•
Feeds continuous
paper backward to
the standby position.
LF/FF button
•
Feeds paper line by
line.
•
Ejects a single sheet
or advances
continuous paper to
the next top-of-form
position when held
down.
Tear Off/Bin button
•
Feeds continuous
paper forward to
the tear-off position.
•
Feeds continuous
paper backward from
the tear-off position to
the top-of-form
position.
•
Selects a cut-sheet
feeder bin when the
cut-sheet feeder is
installed.
Tear Off/Bin light
•
Flashes when
continuous paper is in
the tear-off position.
•
On when bin 1 of the
optional cut-sheet
feeder is selected.
•
Off when bin 2 of the
optional cut-sheet
feeder is selected.
L
Gentian-W Rev.C
A5 size
cover-1
11-12-97
DR, pass 0
