Epson ES-800C, User Manual

Page: 12 / 89

10. If you use an extension cord, make sure that the total of the
ampere ratings on the products plugged into the extension cord
does not exceed the extension cord ampere rating. Also, make
sure that the total of all products plugged into the wall outlet
does not exceed 15 amperes.
11. Never push objects of any kind through cabinet slots as they may
touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any
kind on the scanner.
12. Except as specifically explained in the User’s Guide, do not
attempt to service this product yourself. Opening or removing
those covers that are marked “Do Not Remove” may expose you
to dangerous voltage points or other risks. Refer all servicing in
those compartments to service personnel.
13. Unplug this scanner from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A.
B.
C.
D.
E.
F.
When the power cord or plug is damaged or frayed.
If liquid has been spilled into it.
If it has been exposed to rain or water.
If it does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
If it has been dropped or the cabinet has been damaged.
If it exhibits a distinct change in performance, indicating a
need for service.
Introduction 5